"We can’t cross a bridge until we come to it; but I always like to lay down a pontoon ahead of time." - Bernard M. Baruch
Design: Lift type Foot Valves with C.I. High Strainer
Design: Lift type Foot Valves with M.S. Fabricated Strainer
Manufacturing Standard:
IS: 4038-1986
Available Sizes:
50 mm – 600 mm.
End Connection: Flanged
Test Pressure: Body: 6 Kgf/Cm2for Two Minutes Seat: 2Kgf/Cm2 for Two Minutes
Operation: Fully Automatic.
Design: Single Door Swing type Foot Valve with M.S. Fabricated Strainer
Manufacturing Standard: IS: 4038-1986
Available Sizes: 50 mm – 150 mm.
End Connection: Flanged / Screwed
Test Pressure: Body: 6 Kgf/Cm2 for Two Minutes Seat: 2 Kgf/Cm2 for Two Minutes
Operation: Fully Automatic.
Design: Single Door Swing type Foot Valves with C.I. Taper Strainer
Design: Double Door Swing type Foot Valve with C.I. Strainer
Manufacturing Standard: IS: 4038-1986, Fig. - 2
Available Sizes: 200 mm – 600 mm.
End Connection: Flanged
Test Pressure: Body: 6 Kgf/Cm2 for Two Minutes. Seat: 2 Kgf/Cm2 for Two Minutes
Operation: Fully Automatic.
Design: Double Door Swing type Foot Valve with M.S. Fabricated Strainer
The above figures displayed here in are only for illustrative purpose. The designs are subject to be changed without notice, as a result of continuous R & D carried out by the Company. Detailed Engineering Drawing will be provided separately to original customers only.
WE BELIEVE THAT, PERFORMANCE IS THE ONLY THING WHICH COULD SPEAK FOR ANY ORGANISATION, BETTER THAN ANYTHING. SO WE INSIST ON, USING OUR PRODUCT AND LISTEN FROM THEM.